The Tracketry Assembly allows motorized control of zoom or focus for Super 16 Canon lenses, remotely or at the camera.
The large ring of the Tracketry base (PN162050 or PN162330) attaches to the barrel of the lens. The motor slides through the Eccentric (PN162331), which is attached to the smaller ring of the Tracketry base.
The 48mm Gear (PN357890) then attaches to the motor shaft. The gear meshes with the gearing on the lens and controls either the zoom or focus, depending on where it’s situated on lens barrel.
Riser (PN162091) attaches to a standard cross bridge to support the Tracketry and lens assembly. Use Riser (PN162310) to attach to a 15mm mini-rod snap-on cross bridge.
The Foot (PN162009) is used to attach the Tracketry Riser (PN162091 or PN162310) to the main Tracketry base.
Use PN162050 (w/gear) for Canon Lenses 8-64, 7-63, 11.5-138, 11-165.
Use PN162330 for Canon Lenses 6.66mm or 10.6-180mm.