The WEISSCAM HS-2 Digital Camera is the newest, uncompressed digital High-speed Camera for frame rates up to 4.000fps.

To find a local rental house contact thomas@zgc.com

Additional Product Information

Rental List

Developed as a Stand-alone camera, the WEISSCAM HS-2 Digital Camera, is aimed especially for the needs of cinematographers. An easy workflow, two Streams (RAW + HD) via HD SDI, two formats (4:3 + 16:9) and cinema-style images, it is designed to offer you the freedom of shooting either in HD or RAW mode.

The WEISSCAM HS-2 has a full Format Super35 CMOS Sensor with a global shutter. By using the Interchangeable Mount System (IMS) from P+S Technik you can attach nearly every lens on the camera (PL Mount, Nikon F-Mount, Panavision Mount, etc.) and also change the Mount within a few seconds.

The output of the WEISSCAM HS-2 offers two Streams at the same time and uses the HD SDI interface for both signals.

With the WEISSCAM „RAW IN HD SDI“ mapping, you are able to transport the RAW files via the worldwide standard and fast HD SDI single and dual link interface. The HD stream offers YCbCr in 4:2:2 or 4:4:4. You can choose between linear standard curves like ITU-R 709 or log curve for a higher contrast range within the HD SDI image.

The RAW stream is a 12Bit uncompressed WEISSCAM RAW file and gives you the freedom to debayer in post production.

In conjunction with the WEISSCAM DIGIMAG DM-2, you are able to record both formats via HD SDI: YCbCr and RAW.

An intelligent master/ slave DC/DC power management saves the camera from any short circuit and makes it needless to turn off the camera for a battery change.

A lot of mounting possibilities allows you to connect additional accessories like on-board monitor, lens control system, etc. and power them by the several outputs of the DC/DC board.

The very fast boot up time allows you to be ready to shoot in less than 7 seconds.